Activated carbon does not adsorb dissolved salts, so unchanged TDS does not mean the filter is ineffective. This article explains the difference between TDS and activated carbon targets, verification methods, and the applicable limits of a portable water quality tester.
This article is intended for water purification equipment OEMs and smart appliance system integrators. It introduces factory calibration and quality inspection methods based on the BA111 single-channel TDS sensor IC, covering reference solutions, temperature compensation, UART readings, sampling inspection and the anomaly closed loop.
Rising pool TDS does not automatically mean the water must be changed. This article explains TDS changes from three angles—evaporative concentration, carry-in from top-up water, and chemical accumulation—shows why a single TDS reading is not enough to support a water-change decision, and describes the value and limits of a portable water quality tester in trend recording.
First-draw water and water after flushing represent different water segments, and whether to flush before sampling must follow the purpose of the test. This article clarifies the difference between stagnant-water observation and laboratory lead sampling, and explains when a portable water quality tester is suitable for trend comparison and when testing must return to the laboratory.
An analysis of the engineering value of the NSDD6 industrial multiparameter water quality sensor in COD sensor applications from the perspectives of reagent-free operation, non-contact optics, fouling control and maintenance-oriented design, with emphasis on real-water-sample validation as a prerequisite for project success.
After switching irrigation water sources, continuously recording the water source and EC trends, together with soil, crop and specialized analyses, protects the nursery better than a single test. This article explains the applicable limits and recording methods of a portable water quality tester pen.